ACCESSORIES

Journey Top case 42L silver by Hepco Becker

Available on PreOrder or with Our Dealers

Colour: Silver

• Fits Hepco & Becker rear racks or Aluracks / Easy racks
• Helmet : Holds One 
• Waterproof
• inner bags and railing available
• 42 Ltr
• B x H x T: 50 x 29 x 30 cm

Part Number:- 610085 00 01

Brand:- Hepco & Becker Germany 

Alu Exclusiv Top case 45L by Hepco Becker

Weight: 4.9 kg
Capacity: 40 Liters

• Exclusive RIMOWA design with grooved look
• Dimensions of 45:WxHxD: 50 x 30 x 36 cm
• Completely watertight thanks to a special seal
• Wear and climate protection at case interior
• Corners reinforced with aluminum angle profile
• Extremely rugged metal locks Integrated railing
• Fits all Hepco & Becker top case carriers (rear racks and aluminium racks) 
• Helmet: Won't hold a helmet

Part Number:- 610071 00 00

Brand:- Hepco & Becker Germany

Xplorer Top case 45L fits all top case racks by Hepco Becker 

• Made of 1.5 mm thick plate aluminium and highly impact-resistant plastic moulding
• Capacity 45L
• B x H x T: 47 x 31 x 37.5 cm
• Absorbs impacts and ground contact
• Stable metal locks, integrated carrying handles
• Absolutely watertight, no aluminum wear
• Case and top case available with simultaneous locking on order. So for one key access to all case locks please specify while ordering as each piece/product has a different key)
• Takes a full-face helmet with some more room left in the bow
• Comprehensive range of accessories available
• Fits all H&B rear racks and aluminum racks

Brand:- Hepco & Becker Germany

These top case will fit on the "alurack",  "easyrack" or "porter racks" that is specific to your bike 

Xplorer Top case 45L fits all Aluracks and Easy racks by Hepco Becker 

• Made of 1.5 mm thick plate aluminium and highly impact-resistant plastic moulding
• Capacity 45L
• B x H x T: 47 x 31 x 37.5 cm
• Absorbs impacts and ground contact
• Stable metal locks, integrated carrying handles
• Absolutely watertight, no aluminum wear
• Case and top case available with simultaneous
• Takes a full-face helmet with some more 
• Comprehensive range of accessories available
• Fits all H&B rear racks and aluminum racks
• Lock and key included ( For one key access to all case locks please specify while ordering as each piece/product has a different key)

Part Number:- 

• HB 610217 00 01

Brand:-

Journey Top case 50 L Black by Hepco Becker

Colour: Black

• Fits Hepco & Becker rear racks or Aluracks/Easy racks
• Universal Plate option: Comes with a Universal Base Plate
• Helmets: Upto two depending on the size
• Waterproof
• Inner bags and railing available
• Volume: 48 Ltr.
• Dimensions: B x H x T: 58 x 33 x 44 cm

Part Number:- 

• Hepco Becker fitment: 610086 00 01
• Universal Plate ( Includes Universal Plate): 610087 00 01

Brand:-

• Hepco & Becker, Germany

Journey Top case 50 L Silver by Hepco Becker

Colour: Silver

• For Hepco & Becker rear racks or Aluracks/Easy racks
• Universal Plate option: Comes with a Universal Base Plate
• Helmets: Upto two depending on the size
• Waterproof
• Inner bags and railing available
• 48 Ltr.
• B x H x T: 58 x 33 x 44 cm

Part Number:

Hepco Becker fitment::- 610086 00 09

Universal Plate incl universal base plate::- 610087 00 09

Brand:- Hepco & Becker Germany

Journey Top case 52L Black by Hepco Becker

Available on PreOrder or with Our Dealers

Colour: Black

• Space for 2 helmets and more
• Watertight thanks to special seal
• Case shell made of highly impact-resistant plastic
• Comprehensive range of accessories available
• For H&B tube-rear racks, Aluracks, and Easy racks
• B x H x T: 58 x 35 x 46 cm
• 52 Liter

Part Number:- 610207 00 11

Brand:- Hepco & Becker Germany

Journey Top case 52L Recon Anthracite by Hepco Becker

Available on PreOrder or with Our Dealers

Colour: Black

• Space for 2 helmets and more
• Watertight thanks to special seal
• Case shell made of highly impact-resistant plastic
• Comprehensive range of accessories available
• For H&B tube-rear racks, Aluracks, and Easy racks

Part Number:- 610207 00 04

Brand:- Hepco & Becker Germany

Journey Top case 52L Silver by  Hepco Becker

Available on PreOrder or with Our Dealers

Colour: Silver

• Space for 2 helmets and more
• Watertight thanks to special seal
• Case shell made of highly impact-resistant plastic
• Comprehensive range of accessories available
• For H&B tube-rear racks, Aluracks, and Easy racks
• 52 Liter
• B x H x T: 58 x 35 x 46 cm

Part Number:- 610207 00 09

Brand:- Hepco & Becker Germany

• Totally waterproof due to special seal
• High impact plastic shells
• Extremely robust metal locks, ergonomic handle
• Aerodynamic shape
• Interior pockets and railing available as an accessory
• Fits on all H & B Top case (luggage racks, racks Aluracks and Easy).
• Suitable for a helmet 

 55L Specs

• Content 55 liter
• Length x Width x Height 44 x 57 x 31 mm
• Reflector as the back

Available accessories: Rail, Inner bag, back rest and more.

Part Number:- 610047 00 01

Brand:- Hepco Becker Germany

• The large top case from Hepco & Becker with painted shutters.
• Provides storage space of 55 liters for 2 full-face helmets and more.
• Totally waterproof due to special seal.
• With floor mat and small document pocket.
• High impact plastic shells for absolute robustness.
• Aerodynamic shape.
• Inside pockets, back cushions and railing available as an accessory.
• incl. keys and cylinders
• Fits on all H & B Topcase (Luggage racks and Aluracks).
• Weight: 4.9 kg
• Content 55 liter
• Length x Width x Height 44 x 57 x 31 mm

Optional Railing available

Top case Junior Flash 55L Silver by Hepco Becker

• The large top case from Hepco & Becker with painted shutters.
• Provides storage space of 55 liters for 2 full-face helmets and more.
• Totally waterproof due to special seal.
• With floor mat and small document pocket.
• High impact plastic shells for absolute robustness.
• Aerodynamic shape.
• Inside pockets, back cushions and railing available as an accessory.
• incl. keys and cylinders
• Fits on all H & B Topcase (Luggage racks and Alurack).

Optional Railing available

Part Number:-  610047 00 09

Brand:- Hepco Becker Germany

Orbit Top case 54 L by Hepco Becker

Colour: Black

Futuristic and functional appearance, 3D cover and all-in-one lock concept make this top case indispensable for your next road trip.  The big technical innovation is definitely the all-in-one lock solution.  It takes just one key to open the lid and unlock the top case with the base support.  The TC52 ORBIT can be combined ONLY with our Hepco & Becker aluminum rack and is easily placed and clicked tight - a breeze to handle. It can be optionally upgraded with a rail or back cushion. We also offer a floor mat that gives luggage a soft place to sit.

• Top case made of black, highly impact- resistant plastic
• Futuristic" design with distinctive surface structures
• New all-in-one lock concept that's easy to setup - Just set the top case down and click it in
• 3D logo panel that 
• Naturally watertight!
• Carrying handle integrated into the cover shell
• Room for 2 helmets and more 
• Incl. keys and locks

Optional : Top Luggage rail or back cushion available

Capacity 54 Liters
Weight: 4.6 kg
Dimensions W x H x D: 61 x 45 x 34 cm

Mounting Notes: 

Read this if you have Hepco Becker Racks only!

1. The "Alu Rack" Top Carrier rack hinge would need to be removed for Orbit Topcases!
2. For universal installation the Base plate is already included in the order!

Instructions: -

 Universal Adaptor rack

Features:

• Full-grain Oiled Leather upper
• Mid-height design
• Waterproof and breathable lining
• Vintage leather finish
• Lightweight construction
• Adventure double density anti slip/rubber sole
• Plastic gear pad protection
• Double Adjustable Straps and VELCRO® brand closure
• Large gaiter on the inner to prevent water from entering
• Dynamic accordion style stretch panels 
• Unbreakable plastic buckles
• Ankle TPU internal moulded plastic protection
• Special nylon mid-sole with steel shank
• Extra soft polymer padding with memory foam
• Anti-bacterial replaceable footbed 
• 1 year warranty on the sole
• Comes with storage box and shoe cover

Features:

• Full-grain Oiled Leather upper
• Mid-height design
• Waterproof and breathable lining
• Vintage leather finish
• Lightweight construction
• Adventure double density anti slip/rubber sole
• Plastic gear pad protection
• Double Adjustable Straps and VELCRO® brand closure
• Large gaiter on the inner to prevent water from entering
• Dynamic accordion style stretch panels 
• Unbreakable plastic buckles
• Ankle TPU internal moulded plastic protection
• Special nylon mid-sole with steel shank
• Extra soft polymer padding with memory foam
• Anti-bacterial replaceable footbed 
• 1 year warranty on the sole
• Comes with storage box and shoe cover

Carry your keys in style with the handmade braided keychain. The leather braid has been hand finished to perfection. 

The heavy duty metal carabiners are built to last and ensure that the keys are securely clamped to your pants at all times.

The metal hardware is antique finished for a long lasting vintage appeal. 

| Raw, Rustic and Absolutely Authentic | 

 Get Your name, club name, blood group or any text customised on our premium quality biker patches from Threads United Inc. Easy to use these iron on patches sticks on your riding gear, leathers or any garment within minutes. All you need to do is heat press the patch on your garment using your home iron.

Triumph Bonneville extrem foot peg kit 2015

Extreme Foot Pegs

• The grippy Extreme foot pegs are available as kit for many models.
• The linking is equipped with a fold in protection by standard.
• So the motorcycle will be protected against many damages in case of dropping down.
• The foot pegs are mounted by M8 bolts (standard = M5) wich makes the kit resistand for heavy input.
• Siver linkings, black foot pegs
• Dimension:- foot pegs: aperture 28mm, length 78mm

Triumph Bonneville Foot Peg Linking Front & Rear (07-15)

Foot Pegs with adaptor

• The accurately manufactured joints connect the LSL foot pegs to the original adaptation of most motorcycles.
• There are also adjustable joints available which allows to choose up to 8 positions.

Dimensions:

• Sports : Length 85 mm
• Racing : Length 70 mm

These foot pegs are extremely light and machined from billet aluminum.The foot peg is shaped and designed for optimum strength.

The surface is knurled for extra grip and all sharp edges are rounded for safety reasons.

Precisely machined adaptors provide fitment to most modern bikes.

Colours: -

• Black
• Blue
• Gold
• Red
• Silver
• Titan
• Anthracite

Racing Footpegs For Bonneville (Silver/Black) :

Sold as a set of two pcs

Racing footpegs CNC machined from billet aluminium for style and durability. Made to precise measurements and is a direct replacement to the existing foot peg – all original fittings such as clips, springs and ball bearings must be retained from the original footpegs, everything else is included for fitment.

Length of peg (excluding hanger/fitment): 80mm

• Width of peg: 19mm
• Weight of foot peg and hanger fitment: 60g
• These footpegs are incredibly strong and have been fully stress tested by weights up to 165kg/350 lbs.

Finish:

• Black
• Silver

Touring Footpegs Bonneville T100 and SE (Silver/Black) :

Sold as a set of two pcs

Touring footpegs CNC machined from billet aluminium for style and durability. Made to precise measurements and is a direct replacement to the existing footpeg – all original fittings such as clips, springs and ball bearings must be retained from the original footpegs, everything else is included for fitment.

• Length of peg (excluding hanger/fitment): 90 mm.
• Width of peg: 26 mm.
• Weight of footpegs and hanger fitment: 90g.

Manufactured in UK. These footpegs are incredibly strong and have been fully stress tested by weights up to 165kg/350lbs.

Triumph T120 Foot Pegs  :- Front & Rear 2016

Foot Pegs with adaptor

• The accurately manufactured joints connect the LSL foot pegs to the original adaptation of most motorcycles.
• There are also adjustable joints available which allows to choose up to 8 positions.

Dimensions:

• Sports : Length 85 mm
  
• Racing : Length 70 mm

These foot pegs are extremely light and machined from billet aluminum.The foot peg is shaped and designed for optimum strength.

• The surface is knurled for extra grip and all sharp edges are rounded for safety reasons.
• Precisely machined adaptors provide fitment to most modern bikes.

Colours: -

• Black
• Blue
• Gold
• Red
• Silver
• Titan
• Anthracite

Triumph Daytona 675 /R Foot Peg Linking Front & Rear 2016

Foot Pegs with adaptor

• The accurately manufactured joints connect the LSL foot pegs to the original adaptation of most motorcycles.
• There are also adjustable joints available which allows to choose up to 8 positions.

Dimensions:

• Sports : Length 85 mm
• Racing : Length 70 mm

• These foot pegs are extremely light and machined from billet aluminum.
• The foot peg is shaped and designed for optimum strength.

The surface is knurled for extra grip and all sharp edges are rounded for safety reasons.

Precisely machined adaptors provide fitment to most modern bikes.

Available in six colours:-  Please mention the colour notes

Triumph Scrambler 900 Mark 3 Pivot Pegz (2006-2015) 

• The new Mark 3 Pivot Pegz® are now available and have taken it to a whole new level with a mega wide 60mm platform.
• Due to the pivoting nature of Pivot Pegz you can have the best of both worlds, a mega wide 60mm platform and easy access to the gear shift and rear brake lever, this is due to the fact that the Pivot Pegz platform pivots and opens up access to the lower controls.
• Let us assure you that this isn’t your average footpeg, not only do you get a mega wide platform but the state of the art grip pattern, platform design and spring loaded pivoting action means you get enhanced grip and load distribution as well as reduced impact and fatigue.
• The new Mark 3 Pivot Pegz are also designed to reduce mud packing in the peg. As for the quality, it’s world class, quite simply our aim is to build the best performing and highest quality production footpegs in the world.

• Dual Round Headlight LED Upgrade for Triumph Models by Motodemic a premium Dual Round Headlight LED Upgrade for your Triumph Street Triple, Speed Triple, Rocket III, and Thunderbird.
• These LED units feature ComfortLite™ in both the high beam and low beam, providing added illumination above the horizon with a powerful punch of light down the road. A first in motorcycle lighting.
• The proprietary solid optics offer enhanced visibility to both riders and other drivers, for a new level of rider comfort. Built on a heavy-duty, die-cast aluminum, housing, using signature solid optics and state-of-the-art LEDs to provide a sleek look and deliver unparalleled performance.
• This upgrade includes two LED units that directly replace the poor performing reflector units in your stock buckets. No modifications or wiring necessary. Completely plug and play.
• DOT and ECE Approved
• Color Temperature: 5000K
• Lens Type: Polycarbonate
• Power Draw (each unit): 24.7 watts on low 41.6 watts on high
• Connection Type: H4
• Warranty: Lifetime Limited
• MADE IN USA
• Dual Round Headlight LED Upgrade for Triumph Models by Motodemic
• This upgrade includes two LED units that directly replace the poor performing reflector units in your stock buckets.
• No modifications or wiring necessary. Completely plug and play.

Triumph Speed Triple Foot Peg Linking Front & Rear 2016

Foot Pegs with adaptor

• The accurately manufactured joints connect the LSL foot pegs to the original adaptation of most motorcycles.
• There are also adjustable joints available which allows to choose up to 8 positions.

Dimensions:

• Sports : Length 85 mm
  
• Racing : Length 70 mm

• These foot pegs are extremely light and machined from billet aluminum.
• The foot peg is shaped and designed for optimum strength.

The surface is knurled for extra grip and all sharp edges are rounded for safety reasons.

Precisely machined adaptors provide fitment to most modern bikes.

Available in six colours:-  Please mention the colour notes

Triumph Street Twin Foot Pegs  :- Front & Rear 2016

Foot Pegs with adaptor

• The accurately manufactured joints connect the LSL foot pegs to the original adaptation of most motorcycles.
• There are also adjustable joints available which allows to choose up to 8 positions.

Dimensions:

• Sports : Length 85 mm
• Racing : Length 70 mm

• These foot pegs are extremely light and machined from billet aluminum.
• The foot peg is shaped and designed for optimum strength.

The surface is knurled for extra grip and all sharp edges are rounded for safety reasons.

Precisely machined adaptors provide fitment to most modern bikes.

Colours: -

• Black (...SW)
• Blue (...BL)
• Gold (...GO)
• Red (...RT)
• Silver (...SI)
• Titan (...TI)
• Anthracite (...AN)

Triumph Bonneville T100 Adjustable Foot Peg Linkings Front 

Adjustable Foot Peg Linking

• With this kit, sport riders and touring riders can ­improve their seating position. Both, a raised or a comfortably lowered position are possible.
• The actual position is quickly adjusted with an Allen key, so you can change it on the fly if you choose so.
• How it works: The adjustment allows for 8 individual positions around a radius of 25mm (1”) to create the perfect individual set up for you.

Triumph T100 (17-) Foot Pegs  :- Front & Rear 2016

Foot Pegs with adaptor

• The accurately manufactured joints connect the LSL foot pegs to the original adaptation of most motorcycles.
• There are also adjustable joints available which allows to choose up to 8 positions.

Dimensions:

• Sports : Length 85 mm
• Racing : Length 70 mm

• These foot pegs are extremely light and machined from billet aluminum.
• The foot peg is shaped and designed for optimum strength.

The surface is knurled for extra grip and all sharp edges are rounded for safety reasons.

Precisely machined adaptors provide fitment to most modern bikes.

Colours: -

• Black (...SW)
• Blue (...BL)
• Gold (...GO)
• Red (...RT)
• Silver (...SI)
• Titan (...TI)
• Anthracite (...AN)

• Dual Round Headlight LED Upgrade for Triumph Models by Motodemic a premium Dual Round Headlight LED Upgrade for your Triumph Street Triple, Speed Triple, Rocket III, and Thunderbird.
• These LED units feature ComfortLite™ in both the high beam and low beam, providing added illumination above the horizon with a powerful punch of light down the road. A first in motorcycle lighting.
• The proprietary solid optics offer enhanced visibility to both riders and other drivers, for a new level of rider comfort. Built on a heavy-duty, die-cast aluminum, housing, using signature solid optics and state-of-the-art LEDs to provide a sleek look and deliver unparalleled performance.
• This upgrade includes two LED units that directly replace the poor performing reflector units in your stock buckets. No modifications or wiring necessary. Completely plug and play.
• DOT and ECE Approved
• Color Temperature: 5000K
• Lens Type: Polycarbonate
• Power Draw (each unit): 24.7 watts on low 41.6 watts on high
• Connection Type: H4
• Warranty: Lifetime Limited
• MADE IN USA
• 
• Dual Round Headlight LED Upgrade for Triumph Models by Motodemic
• This upgrade includes two LED units that directly replace the poor performing reflector units in your stock buckets.
• No modifications or wiring necessary. Completely plug and play.

Triumph Tiger 800 XC, XCX, XCA, XR, XRX, XRT (2011-2016) 

• The new Mark 3 Pivot Pegz® are now available and have taken it to a whole new level with a mega wide 60mm platform.
• Due to the pivoting nature of Pivot Pegz you can have the best of both worlds, a mega wide 60mm platform and easy access to the gear shift and rear brake lever, this is due to the fact that the Pivot Pegz platform pivots and opens up access to the lower controls.
• Let us assure you that this isn’t your average footpeg, not only do you get a mega wide platform but the state of the art grip pattern, platform design and spring loaded pivoting action means you get enhanced grip and load distribution as well as reduced impact and fatigue.
• The new Mark 3 Pivot Pegz are also designed to reduce mud packing in the peg. As for the quality, it’s world class, quite simply our aim is to build the best performing and highest quality production footpegs in the world.

• H3 bulb, 12V, 55 watts
• E test symbol (no registration requierd)
• Halogen lens
• Easy to install
• Complete set of fog lights incl. switch, wiring harness, relay and mounting kit
• Can only be fastened model-specifically to pre-installed sockets on Hepco&Becker Protection bar
• No universal fastening
• Protection grill for Micro Flooter no: 730100

Triumph Tiger Explorer 1200 XC Mark 3 Pivot Pegz (2012-2015) 

• The new Mark 3 Pivot Pegz® are now available and have taken it to a whole new level with a mega wide 60mm platform.
• Due to the pivoting nature of Pivot Pegz you can have the best of both worlds, a mega wide 60mm platform and easy access to the gear shift and rear brake lever, this is due to the fact that the Pivot Pegz platform pivots and opens up access to the lower controls.
• Let us assure you that this isn’t your average footpeg, not only do you get a mega wide platform but the state of the art grip pattern, platform design and spring loaded pivoting action means you get enhanced grip and load distribution as well as reduced impact and fatigue.
• The new Mark 3 Pivot Pegz are also designed to reduce mud packing in the peg. As for the quality, it’s world class, quite simply our aim is to build the best performing and highest quality production footpegs in the world.

Made of Water Resistant and Water Repellent material, Durable and Gripping sole.

The MotoTech Trooper Boot Covers will ensure your shoes are always protected from water, slush and dirt.  

- Shell: 100% coated nylon (stronger than polyester) 
- Sole: 100% PVC (highly-durable) treated with anti-skid properties
- All Seams-Sealed on the Upper Shell
- Reflective Branding and Accents for High Visibility in Extreme Conditions
- Cuff Adjusters and Full Zipper with Button Closure and Elastic Band on top to ensure a Snug Fit
- Re-inforcement Fabric on Left Foot
- Anti-Slip Fabric on the Heel and Toes

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

The tyre repair kit includes:

• An insertion tool.
• An reamer tool
• Blade.
• Five strips of rubber plugs.
• Glue solution
• You can purchase any of our refill cans by Motul or Super Help for emergency Air fill.
• A plier is soon going to be separately available as a part of the tool kit or a handy tool

Any tyre that has been repaired should be removed from the rim and professionally inspected (and re-repaired if deemed necessary) to ensure there is no internal damage that is not visible from the outside.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.

Simple to you use Do It Yourself patches can be heat press using the following:

Instructions to stick your patch:

1. Select the place of the garment where you would like to stick the patch.
2. Ensure that there are no wrinkles or folds on the garment.
3. Take a home iron press and pre-heat at 270 F for 30 seconds. Ensure that you are not overheating the iron.
4. Now pre-heat the area of the garment ( area where you want to stick the patch) for 20 seconds.
5. Peel off the matt area of the patch and place it on the garment and place a towel or a cotton cloth on it.
6. Use the home iron and press it for 20-30 seconds. Once done, remove the cloth and let the patch cool down for 30 seconds.
7. You can now see the patch has stuck on the garment with smooth corners.

Note: Do no wash the patched garment with hot water or use a hot blow dryer on it as it might melt the patch glue.